Home » Whitening products » Whiteness HP AutoMixx

Whiteness HP AutoMixx

Hydrogen peroxide whitening gel at 6% and 35% for in-office use.

Self-mixing system
Single application per session
Contains calcium: maintains the integrity of enamel

Benefits

Single application per session:
The product may be kept up to 50 minutes in contact with the teeth without having to be changed, since the pH remains neutral and stable during the whole session.

Easy to Handle:
The phases are mixed via a self-mixing tip and the product is released ready for use, with no need for manual manipulation.

Cost reduction:
The remaining content can be stored and used later.

Contains calcium:
Improves enamel microhardness against demineralization and keeps the enamel integrity during the whitening process.

No color change:
The product has bluish-green color and does not change color during the process, thus facilitating visual control.

With heat blocker:
In cases when the professional desires to use some sort of light source, the heat blocker prevents the heat generated by these sources from reaching the pulp, preventing hypersensitivity.

Recommendations

Whitening of vital and non-vital teeth using the in-office whitening technique.

Commercial Availability

Refill:

1 Whiteness HP Automixx syringe with 5g at 35%.
Self-mixing applicator tips.

Kit:

1 Whiteness HP Automixx syringe with 5g at 35%.
5 self-mixing applicator tips.
1 syringe OF Top dam with 2g.
1 bottle with 2g of peroxide neutralizing solution (Neutralize).

Mini kit:

1 Whiteness HP Automixx syringe with with 2g at 6%.
2 self-mixing applicator tips.
1 syringe of Top dam with 1g.

Step by step

Step 1 of 9

Perform prophylaxis of the teeth, leaving the tooth surface free from biofilm. Select and record the patient’s teeth shade with a shade guide and/or photograph prior to starting whitening.

Step 2 of 9

Proceed to the insertion of the Arcflex (FGM) lip retractor, to facilitate access and handling of the buccal cavity, and then apply Desensibilize KF 2% for 10 minutes on the teeth that will be whitened.

Step 3 of 9

After applying the desensitizing agent, remove the gel and dry the teeth and gums with air jets. Make the relative isolation by applying the light-curing resin Top dam (FGM).

Step 4 of 9

With the auto mixing tip coupled to the double-body syringe that contains the whitening gel, press the plunger until the phases (peroxide and thickener) are slowly mixed. A small quantity of gel should be dispensed into a container prior to applying the product to the patient’s teeth. It will assure that the applied product is properly homogenized.

Step 5 of 9

Directly apply the gels to the teeth to be whitened, generally from the 1st or 2nd premolars to the other. Cover the vestibular face of the teeth with a gel layer as thin as possible, using the auto mixing tip to spread the product. The gel may be extended to the small incisive/occlusal surface area of the teeth. If you wish to use a light source device, start using it shortly after applying the gel. For each equipment, there is a specific protocol of light exposure time. Follow the manufacturer’s instructions for the light application time, however, observe the time protocol to apply the product onto the teeth.

Step 6 of 9

After applied, the gel must be left in contact with the teeth for up to 50 minutes, during which the professional may move the gel with a probe or disposable micro applicator, such as Cavibrush (FGM), in order to remove the air bubbles and renew the contact between gel and teeth. There is no need to change the gel during the session. Note: application times for whiteners are only suggested and must be managed by the professional. Shorter times or treatment interruptions may occur in cases of dental hypersensitivity.

Step 7 of 9

At the end of the session, remove the gel with the thin suction cannula, and wash the teeth thoroughly. Removal of the gum dam may be performed with a probe or similar.

Step 8 of 9

Polish the teeth with the Diamond Excel (FGM) polishing paste, and Diamond (FGM) or Diamond Flex (FGM) felt disks.

Step 9 of 9

The patient should return after 7 days, allowing the effective assessment of the tooth’s shade. If required, further whitening sessions may be performed according to the above steps. In general, we recommend 2 to 3 whitening sessions to achieve good results.

Important Notes

To prevent dental hypersensitivity during and after treatment, Desensitize KF2% (FGM) (potassium nitrate at 5% and sodium fluoride at 2%) may be used prior to whitening, in prophylactic character. The option of applying the desensitizer after whitening is also valid, however less efficient in certain cases. In both cases (prior to or after applying the whitener), Desensitize KF2% (FGM) should be applied to the teeth for 10 minutes. In cases of high hypersensitivity after the session, Desensitize 0.2% (FGM) (at-home use desensitizer) may be applied for 10 minutes into an individual mold, by the patient, on daily basis until the symptoms disappear.

Important Notes

Monitor patient throughout the whitening regarding dental hypersensitivity and possible spots of peroxide irritation in soft tissues. Cracks on the enamel or exposure of dentine may cause acute and intense pain. In these cases, we recommend interrupting the treatment, seeking corrective treatment prior to resuming.

Important Notes

If the whitening obtained does not meet the expectations, and the patient does not present hypersensitivity or other issues, you may reapply the product for up to two more sessions, totaling three sessions. If more than one session is required, consider a minimum interval between sessions of 7 days.

Step 1 of 9

Perform prophylaxis of the teeth, leaving the tooth surface free from biofilm. Select and record the patient’s teeth shade with a shade guide and/or photograph prior to starting whitening.

Step 2 of 9

Step 3 of 9

After applying the desensitizing agent, remove the gel and dry the teeth and gums with air jets. Make the relative isolation by applying the light-curing resin Top dam (FGM).

Step 4 of 9

Step 5 of 9

Step 6 of 9

Step 7 of 9

At the end of the session, remove the gel with the thin suction cannula, and wash the teeth thoroughly. Removal of the gum dam may be performed with a probe or similar.