Home » Produtos Estética » Allcem Core

Allcem Core

Dual-curing resin cement for core build-up and adhesive cementation of intraradicular posts and prosthetic crowns.

3-in-1 product
Adhesion to any substrate
Mechanical strength

Benefits

3-in-1 product
Indicated for core build-up, cementation of posts and crowns.

Radiopacity
Possibility of radiographic diagnosis.

Mechanical Resistance
High resistance to bending and compression.

Dual curing
Chemical curing in environments where light does not reach and light curing to facilitate the core build-up work.

Practicality
The product is applied evenly inside the root canal, dispensing manual mixing and insertion with Lentulo drills.

Adhesion to any substrate
Excellent adhesion to dentin, enamel, CAD/CAM blocks, ceramic, porcelain, resin and metal.

Recommendations

Porcelain fused-to-metal crowns and bridges;

Metal crowns, bridges, inlays and onlays (high noble, noble, and base metals);

Crowns and bridges with minimal tooth structure;

Maryland bridges (resin bonded bridges);

All ceramic/porcelain and pre-cured composite crowns, bridges, inlays and onlays;

Endodontic posts;

Adhesive core build-up of vital and non-vital teeth

Commercial Availability

Seringa de corpo duplo

• 01 embalagem com 1 seringa de corpo duplo com 6g, disponível nas cores: A1, A2, A3 ou Opaco Pérola.
• 08 bicos automisturantes com pontas aplicadoras.

Step by step

Step 1 of 5

With the operatory field free of moisture (under relative or absolute isolation), start preparing the canal in the length previously determined by the Whitepost (1 1 300x201FGM) protocol.

Step 2 of 5

The application of phosphoric acid and dental adhesive in the canal must follow the protocol of the respective products used, according to the adhesive procedure.1 1 300x201

Step 3 of 5

Using the auto mixing nozzle with intracanal applicator, apply cement into the canal and position the post. The overflowing cement may be used to make the core build-up and further material should be added around the post. The working time is approximately 1 minute and 30 seconds, and the light-curing time is 40 seconds per increment.1 1 300x201

Step 4 of 5

Once the posts are cemented and the core build-up in their gross format, wait for the chemical-curing time (6 to 7 minutes, intracanal) and perform the necessary wearing of it.1 1 300x201

Step 5 of 5